Watch the selected arm and torch approach, weld and return. Every route is checked against the modeled parts and fixtures first.
OPERATOR TRAINING · NEXT STEPLoading robot and torch
The 3D assets must load before checking motion.
ACTIVE CELL
FANUC CRX-10iA/LFronius · Autogenous TIG
Recipe · demo onlyDEMO-SS-01
Setup required
3D workcellFANUC OEM CAD · actual link lengths
+ 4 × 4 m TABLE · LARGE SAMPLE 1 × 2 m Magnetic module on qualified steel workbench
TIG reference tool · supplier CAD pending
Selected seam Checked seam
Drag to orbit · Scroll to zoom · Click an edge
LOADING 3D CAD…Generate a path before dry run or welding
TCP X / Y / Z-150 / 1400 / 280 mm
ArcOFF
Selected path300 mm · 1 seams
Completed0 cycles
Generate and check the weld path, then complete the setup checks before initialization.
SOP job review required before welding.
Awaiting initializationArc inhibited until ready
Stability & motion diagnostics
Simulated signals
Base inclination0.02°O3 not selected
Cable pull12 NO4 not selected
Feet / seating4 / 4Check required
CalibrationRequiredResets after movement
Readings illustrate the interface; they are not calibrated sensor limits. A level sensor cannot establish magnetic holding force. Required safety functions remain in the local safety controller.
Event log
Collision-aware demonstrator loaded. No machine connection.
